Product Watch
Rugged and accurate
Rugged and accurate

Isotech’s Quick Cal range of testers are ideally suited to operators that require a rugged, accurate dry-block calibrator for on-site operations.  Two options are available for varying temperature ranges: The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ideal for the medical, sterilisation and food industries; The High Temperature Quick Cal covers the temperature range from 30°C to 350°C.

Both have interchangeable inserts, so you don’t need to buy another calibrator each time you find a new diameter sensor to calibrate. The Low Temperature Quick Cal is particularly exciting as it operates from a small 12-volt battery, making it truly portable. Alternatively, a mains supply is available with 100V - 240V, 50/60Hz input.

The Low Temperature Quick Cal includes two inserts: one blank and the other drilled 6.8mm diameter at 120mm deep. Clients have the option to order pre-drilled inserts to suit needs as required. Each calibration well is 13mm diameter and 120mm deep.

The High Temperature Quick Cal has a single larger well and interchangeable inserts: 25mm in diameter by 120mm deep. Blank and other special drillings are available to order. The High Temperature Quick Cal is supplied 100-130 or 200-250V AC, 50/60Hz.

A range of accessories are available, including: A customised carry case; custom-made inserts and a rechargeable battery (for the Low Temperature Quick Cal).  

Details, Ph: 09 526 0096
sales@instrumatics.co.nz
www.instrumatics.co.nz

 

Publishing Information
Page Number:
6
Related Articles
Precise vibration analysis provides reliability
Precise vibration analysis provides reliability
To prevent scrap and protect machine components, tools and work-pieces during machining...
Ionizers take static out of manufacturing environments
Ionizers take static out of manufacturing environments
Static is problematic in the manufacturing environment. Static causes dust and this...
Maxon motor Australia and the Institute of Professional Engineers NZ (IPENZ) are teaming
DC motor specialist sponsors lecture series featuring leading surgical robotics expert Dr Catherine Mohr
Maxon motor Australia and the Institute of Professional Engineers NZ (IPENZ) are teaming...